This guide explains all Frigidaire Refrigerator error codes (CH series) with simple troubleshooting steps to help you identify and fix common issues safely before calling a technician.
SY CE
Communication Error Between Control Boards
- Power cycle the refrigerator for 5–10 minutes.
- Inspect wiring between main control board and UI board.
- Check for loose or corroded connectors.
- Replace main PCB if communication fails.
SY CE
Communication Error Between Control Boards
- Power cycle the refrigerator for 5–10 minutes.
- Inspect wiring between main control board and UI board.
- Check for loose or corroded connectors.
- Replace main PCB if communication fails.
SY CE1
Main Control Communication Failure
- Reset appliance power supply.
- Inspect main control board connections.
- Check harness continuity between modules.
- Replace control board if error persists.
SY CF
Condenser Fan Failure
- Check condenser fan for dust or obstruction.
- Inspect fan motor wiring and voltage supply.
- Ensure proper airflow around rear unit.
- Replace condenser fan motor if not running.
SY EF
Evaporator Fan Failure
- Check evaporator fan blade for ice blockage.
- Inspect fan motor and wiring connections.
- Defrost unit if ice buildup is present.
- Replace evaporator fan motor if faulty.
5Y EF
Evaporator Fan Circuit Error
- Inspect evaporator fan wiring harness.
- Check control board output voltage.
- Look for moisture or corrosion near fan circuit.
- Replace fan motor or control board if needed.
SY FF
Freezer Sensor Fault
- Test freezer thermistor resistance with multimeter.
- Check sensor wiring for damage or looseness.
- Ensure correct placement inside freezer compartment.
- Replace sensor if readings are abnormal.
SH
Shorted Humidity Sensor
- Inspect humidity sensor wiring connections.
- Check for moisture or water intrusion.
- Test sensor resistance using a multimeter.
- Replace humidity sensor if shorted.
SY CF1
Compressor Fan Issue
- Check compressor fan for obstruction or debris.
- Inspect fan motor wiring and capacitor (if applicable).
- Ensure proper ventilation around compressor area.
- Replace compressor fan motor if faulty.
OP
Door Open Alert
- Ensure refrigerator door is fully closed.
- Inspect door gasket for dirt or damage.
- Remove any obstruction preventing sealing.
- Test door switch for proper operation.
SY DF
Defrost System Failure
- Check defrost heater continuity.
- Inspect defrost thermostat and wiring.
- Verify control board defrost cycle operation.
- Replace heater or control board if needed.
SY dH
Defrost Heater Fault
- Test defrost heater resistance.
- Inspect wiring harness for damage.
- Check for ice buildup in evaporator area.
- Replace heater if no continuity is found.
SY tS
Temperature Sensor Error
- Check thermistor resistance values.
- Inspect wiring for damage or looseness.
- Ensure sensor is properly positioned.
- Replace sensor if readings are unstable.
SY LO
Low Temperature Warning
- Check temperature settings.
- Inspect thermostat and sensor operation.
- Ensure proper door sealing.
- Allow system to stabilize.
SY HI
High Temperature Warning
- Check for door left open or poor sealing.
- Clean condenser coils.
- Verify evaporator fan operation.
- Allow unit to cool down.
SY PF
Power Failure Detected
- Check household power supply.
- Reset refrigerator by unplugging for 5 minutes.
- Verify outlet stability.
- Restore settings after reboot.
SY ER
General System Error
- Perform full power reset.
- Check all wiring connections.
- Inspect control board for damage.
- Replace main PCB if error persists.
SY dF1
Defrost Sensor Failure
- Test defrost sensor resistance.
- Check wiring for breaks or corrosion.
- Inspect evaporator area for ice buildup.
- Replace sensor if readings are incorrect.
SY CO
Compressor Overload Protection
- Allow compressor to cool down.
- Check condenser coils for dirt buildup.
- Verify voltage supply stability.
- Replace compressor overload relay if needed.
SY FL
Airflow Restriction Fault
- Remove food blocking air vents.
- Check evaporator fan operation.
- Clean internal airflow channels.
- Ensure proper spacing inside compartments.
SY LS
Light Switch Failure
- Check door light switch operation.
- Inspect wiring for damage.
- Test switch continuity.
- Replace switch if faulty.
SY UC
Unexpected Control Reset
- Check power stability.
- Inspect control board for faults.
- Look for loose wiring connections.
- Replace PCB if resets continue.
SY CE1
Main Control Communication Failure
- Reset appliance power supply.
- Inspect main control board connections.
- Check harness continuity between modules.
- Replace control board if error persists.
SY CF
Condenser Fan Failure
- Check condenser fan for dust or obstruction.
- Inspect fan motor wiring and voltage supply.
- Ensure proper airflow around rear unit.
- Replace condenser fan motor if not running.
SY EF
Evaporator Fan Failure
- Check evaporator fan blade for ice blockage.
- Inspect fan motor and wiring connections.
- Defrost unit if ice buildup is present.
- Replace evaporator fan motor if faulty.
5Y EF
Evaporator Fan Circuit Error
- Inspect evaporator fan wiring harness.
- Check control board output voltage.
- Look for moisture or corrosion near fan circuit.
- Replace fan motor or control board if needed.
SY FF
Freezer Sensor Fault
- Test freezer thermistor resistance with multimeter.
- Check sensor wiring for damage or looseness.
- Ensure correct placement inside freezer compartment.
- Replace sensor if readings are abnormal.
SH
Shorted Humidity Sensor
- Inspect humidity sensor wiring connections.
- Check for moisture or water intrusion.
- Test sensor resistance using a multimeter.
- Replace humidity sensor if shorted.
SY CF1
Compressor Fan Issue
- Check compressor fan for obstruction or debris.
- Inspect fan motor wiring and capacitor (if applicable).
- Ensure proper ventilation around compressor area.
- Replace compressor fan motor if faulty.
OP
Door Open Alert
- Ensure refrigerator door is fully closed.
- Inspect door gasket for dirt, damage, or deformation.
- Remove any obstruction preventing proper sealing.
- Test door switch for correct operation.
SY DF
Defrost System Failure
- Check defrost heater continuity.
- Inspect defrost thermostat and wiring.
- Verify control board defrost cycle activation.
- Replace heater or control board if needed.
SY dH
Defrost Heater Fault
- Test defrost heater resistance.
- Inspect wiring harness for breaks or corrosion.
- Check for ice buildup in evaporator area.
- Replace heater if no continuity is found.
SY tS
Temperature Sensor Error
- Check thermistor resistance values.
- Inspect wiring for damage or loose connections.
- Ensure sensor is properly positioned in compartment.
- Replace sensor if readings are unstable.
SY LO
Low Temperature Warning
- Check temperature settings on control panel.
- Inspect thermostat and sensor operation.
- Ensure door seals are tight and intact.
- Allow system to stabilize after adjustments.
SY HI
High Temperature Warning
- Check for door left open or poor sealing.
- Inspect condenser coils for dust buildup.
- Verify evaporator fan is operating.
- Allow unit to cool after resolving issue.
SY PF
Power Failure Detected
- Check household power supply and breaker.
- Reset refrigerator by unplugging for 5 minutes.
- Verify outlet stability and voltage.
- Restore settings after reboot.
SY ER
General System Error
- Perform full power reset of the refrigerator.
- Check all wiring harness connections.
- Inspect control board for damage or corrosion.
- Replace main PCB if error persists.